Error Messages; Status Messages - MUTOH VJ-1304 Quick Reference

5 Troubleshooting
5.4

Error messages

This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
5.4.1

Status messages

This section describes messages displayed during printer normal operation.
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display
1 Ready to Print
2 Media End
3 Receiving
4 Converting
5 Printing
6 Warming Up
7 Cleaning **%
8 Ink Refill **%
9 Washing
10 Moving Origin Pos.
11 Confirm Position – >E
12 Remove Cartridges
13 ** Initialing **
14 ** Press 2sec. **
15 Insert CleaningCart.
16 Insert InkCartridges
Remedy
Standby (Media is loaded).
Standby (Media is not loaded).
Receiving data.
Analyzing data.
Under printing.
Warming up the heater.
Cleaning the head.
Please wait a while.
Filling the ink.
Please wait a while.
Washing the print head by Head washing.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
The print head is moving to the original
printing position in the Origin setup menu.
Press the [Enter] key.
Washing the head.
Attach the cleaning cartridge.
Initializing the setting in the Initialization
menu.
Please wait a while.
The [Cleaning] key or the [Nozzle Check] key
is pressed for less than 2 seconds.
Press the key for more than 2 seconds again.
Washing the head.
Attach the cleaning cartridge.
Filling the ink.
Insert an ink cartridge.
5-20
VJ-1304 QUICK REFERENCE
Reference
—
3.5 Setting
media
—
—
—
—
4.2.3 Head
cleaning
3.4 Installing ink
cartridges
3.4 Installing ink
cartridges
"5 Panel setup
menu" in the
Operation Manual
"5 Panel setup
menu" in the
Operation Manual
"5 Panel setup
menu" in the
Operation Manual
"5 Panel setup
menu" in the
Operation Manual
2.1.3 Operation
panel
3.4 Installing ink
cartridges
3.4 Installing ink
cartridges