MUTOH VJ-1304 Quick Reference page 99

VJ-1304 QUICK REFERENCE
No. Display
17 Transport Mode
18 Media: Type ** OK?
19 Media Initial
20 Cover Open
21 Lever Up
22 Manual Cut -> ENTER
NOTE NOTE
• If any message that is not in the table above is displayed on this product, there is some operation
malfunction.
Refer to "7.2.2 Error message display and remedies to 7.2.5 Error requiring restart" in the Operation
Manual, and check the condition of the product and remedies.
TIP
• The value of the Authorization Code may be displayed for the display of the option function.
For details, contact your local MUTOH dealer.
Remedy
Preparing for transportation.
Please wait a while.
Initializing the media.
Please wait a while.
(** represents the setup media type.)
The front cover is open.
The media loading lever was switched to the
back side.
Set the media.
Roll media is fed to the media cut position
after printing.
Press the [Enter] key after cutting media.
5-21
5 Troubleshooting
Reference
"6.3.2
Transporting the
printer" in the
Operation Manual
"3.4.4 Setting
media type" in the
Operation Manual
3.5 Setting
media
3.5 Setting
media
3.7.3 Cutting
media