When The Media Cut Menu Is Set To "Off - MUTOH VJ-1304 Quick Reference

3 Basic usage
3.7.3.2

When the Media Cut menu is set to "Off"

Follow the procedure below to cut roll media.
TIP
• For details of Media Cut menu, refer to the following manuals.
"5.1.10 Media Cut menu" in the Operation Manual
1. Verify the following regarding the operational condition of the product.
• Printing or other operations are not in progress.
• The operation panel display is Normal.
2. If the roll media cut position is changed, refer to "3.7.1 Feeding media" and advance the roll media
to the desired cut position.
3. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
CAUTION
• Pay attention to the following points when you cut roll media.
Mishandling the razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
1
2
3
No.
1
2
3
• Cutting roll media is complete.
Media guide
Media cut groove
Razor blade
Name
3-26
VJ-1304 QUICK REFERENCE