Configuring The Dns Server - HP 5920 series Fundamentals Configuration Manual

Step
4. Configure the address
pool.
5. Specify the URL of the
configuration file or script
file.
Configuring the DHCP server when a TFTP file server is used
Step
1. Enter system view.
2. Enable DHCP.
3. Create a DHCP address
pool and enter its view.
4. Configure the address
pool.
5. Specify a TFTP server.
6. Specify the configuration
file name.

Configuring the DNS server

A DNS server is required in the following situations:
Command
•
(Method 1.) Specify the
primary subnet for the
address pool:
network network-address
[ mask-length | mask mask ]
•
(Method 2.) Configure a static
binding:
static-bind ip-address
ip-address [ mask-length |
mask mask ] { client-identifier
client-identifier |
hardware-address
hardware-address [ ethernet
| token-ring ] }
bootfile-name url
Command
system-view
dhcp enable
dhcp server ip-pool pool-name
•
(Method 1.) Specify the primary subnet
for the address pool:
network network-address [ mask-length
| mask mask ]
•
(Method 2.) Configure a static binding:
static-bind ip-address ip-address
[ mask-length | mask mask ]
{ client-identifier client-identifier |
hardware-address hardware-address
[ ethernet | token-ring ] }
•
(Method 1.) Specify the IP address of
the TFTP server:
tftp-server ip-address ip-address
•
(Method 2.) Specify the name of the
TFTP server:
tftp-server domain-name
domain-name
bootfile-name bootfile-name
169
Remarks
Use either or both methods.
By default, no primary subnet or static
binding is configured.
You can add multiple static bindings.
One IP address can be bound to only one
client. To change the binding for a DHCP
client, you must delete the binding and
reconfigure a binding.
By default, no configuration file URL is
specified.
Remarks
N/A
By default, DHCP is disabled.
By default, no DHCP address
pool is created.
Use either or both methods.
By default, no primary subnet or
static binding is configured.
You can add multiple static
bindings.
One IP address can be bound
to only one client. To change
the binding for a DHCP client,
you must delete the binding and
reconfigure a binding.
Use either or both methods.
By default, no TFTP server is
specified.
If you specify a TFTP server by
its name, a DNS server is
required on the network.
By default, no configuration file
name is specified.