Table of Contents
Advertisement
Operation instructions
3. Operation instructions
3.1 Operation procedures
3.1.1 Fitting and removing a feed cylinder (1:E/1:F)
•
•
•
•
•
•
3.1.2 Choosing the feed attachment
•
•
•
3.1.3 Fitting and removing the feed hopper attachment (7:A)
•
•
•
•
•
When fitting, fold down the locking handle (2:F).
Push the feed cylinder (2:A) onto the hinge pins (2:G) of the machine, and lower
the feed cylinder.
Raise the locking handle.
When removing, first remove the feed attachment (1:A/1:B/1:C/1:D).
Lower the locking handle (2:F).
Remove the feed cylinder (2:A) from the hinge pins (2:G) of the machine.
The feed hopper attachment (1:A) is used mainly for cutting potatoes, onions, dry
bread, etc.
The tube attachment (1:B) is used mainly for cutting cucumber, leek, paprika, etc.
The manual (1:C) and the pneumatic (1:D) push feed attachments are used mainly
for cutting cabbage, lettuce, cheese, carrots, etc.
Press in the stop button (2:C).
When fitting, fit the feed cylinder with two internal guides (1:E).
Place the feed hopper attachment in the centre of the feed cylinder, with the shaft
(7:B) in the feed cylinder tube (7:C).
Press down the feed hopper attachment and turn the locking knob (7:D) anti-clock-
wise.
When removing, turn the locking knob (7:D) clockwise and remove the feed hop-
per attachment.
22.2.2007
Rev. 2.0
9
Advertisement
Table of Contents
