Safety
2. Safety
2.1 Safe use of the appliance
Take great care not to injure your hands on sharp blades of the cutting tools (3) and feed
cylinder (1:F) and moving parts.
Never put your hands in any of the feed attachments (1:A/1:B) or the feed cylinders (1:E/
1:F) other than for cleaning.
Never put your hands in the machine outlet (2:H) when the feed cylinder in lowered and
the locking handle is raised.
Always press the machine stop button (2:C) before fitting or removing cutting tools, etc.
even if the machine is not running.
The machine may be installed only by an authorized specialist.
Always use the pushers (8:E) for cutting by means of the tube attachment.
Only an authorized specialist should be allowed to repair the machine and open the ma-
chine housing.
Use the spanner (4:H) to unscrew the agitator device (4:E), locking bolt (4:F) and decor-
ing device (4:G) by turning them clockwise.
When using the tube attachment (1:B) never use cutting tools larger than 10 mm.
8
22.2.2007
Rev. 2.0