• On the idle screen, if «MENU» is not displayed above the F1 key, press the
• Press F1, the terminal displays (Main menu) screen.
•
• Using F2 or F3 to navigate, select (Term config) and press the green key.
• Select (POS comm) then press the green key.
• Select (Registration) and press the green key.
• The terminal displays (Waiting for POS communication).
• From the Point-of-sale System that you wish to associate with the Payment
• Upon receipt of the request, the terminal will display the IP address of the
• Press F4 to accept the association or F1 to clear the current association and
3. Terminal number configuration
IMPORTANT: The terminal number will be given to you by Desjardins Installation Support.
To obtain the terminal number(s) associated with this merchant:
Call (514) 281-7148 (or toll-free 1-866-333-1210)
o On the idle screen, if «MENU» is not displayed above the F1 key, press the yellow key
followed by the "0" key to unlock the terminal menus.
o Press F1, the terminal displays (Main menu) screen.
Select (Configuration) then press the green key, the terminal displays (Configuration)
o
screen.
o Using F2 or F3 to navigate, select (Technician) and press the green key, the terminal
displays (Password) screen.
o Enter the password CDTC and press the green key, the terminal displays (Technician)
screen.
• To enter a letter, press the corresponding number then the F key until the desired
o Select (Terminal ID) then press the green key.
o The terminal displays the terminal number that is currently in memory.
o Press the yellow key to clear the number from memory and enter the terminal number in
MMMMMMSS format, where:
• MMMMMM = merchant number
FLEX iPP320 - Installation Guide_v1.50.docx
yellow key followed by the "0" key to unlock the terminal menus.
Select (Configuration) then press the green key, the terminal displays
(Configuration) screen.
Terminal, initiate a service request while the terminal is displaying (Waiting
for POS communication).
Point-of-sale System that sent the request, along with the message (Accept?).
press the green key to put the terminal back in waiting mode.
letter is displayed.
22