Leuze electronic BCL 608i Operating Instruction page 66

Command
Acknowledgment
positive
Acknowledgment
negative
Writing parameter set
Command
Description
Leuze electronic
PD
PT<BCC><PS type><Status><Addr.><P.value addr.><P.valueAddr.+1>...
[;<Addr.><P.value addr.>]
<BCC>
0 No check digits
3 BCC mode 3
<PS type>
0 Parameter values stored in the flash memory
3 Operating values stored in RAM
<Status>
0 No further parameters
1 Additional parameters follow
<Addr.> Relative address of the data within the data set
aaaa Four-digit,
unit [dimensionless]
<P.value> Parameter value of the -bb- parameter stored at this address.
The parameter set data is converted from HEX format to a 2-
byte-ASCII format for transfer.
PS=<aa>
<aa> Status acknowledgment,
unit [dimensionless]
0 No difference
1 Syntax error
2 Impermissible command length
6 Impermissible combination, parameter set 1 and parameter set 2
8 Invalid parameter set
PT
The parameters of the device are grouped together in a parameter set and
permanently stored in memory. There is one parameter set in permanent
memory and one operating parameter set in volatile memory; in addition,
there is a default parameter set (factory parameter set) for initialization. This
command can be used to edit the first two parameter sets (in permanent and
volatile memory). A check sum can be used for reliable parameter transfer.
BCL 608i
Online commands
66