Leuze electronic BCL 608i Operating Instruction page 38

Table 8.2:
Level 3 Level 4
Max. no. of
labels
Decoder 1 Symbology
(Code type)
Number of digits
Reading reliability
Check digit method
Check digit transmis-
sion
Decoder 2 Symbology
Number of digits
Reading reliability
Check digit method
Check digit transmis-
sion
Leuze electronic
Decoder table submenu
Level 5
Interval mode
Digits 1
Digits 2
Digits 3
Digits 4
Digits 5
Interval mode
Digits 1
Digits 2
Digits 3
Digits 4
Digits 5
Selection/configuration option
Description
Value between 0 and 64
The value set here specifies the maximum number of labels that
should be detected for each reading gate.
No code
Code 2/5 Interleaved
Code 39
Code 32
Code UPC
Code EAN
Code 128
EAN Addendum
Codabar
Code 93
GS1 DataBar Omnidirectional
GS1 DataBar Limited
GS1 DataBar Expanded
If No code is configured, the current and all subsequent decoders
are deactivated.
OFF/ON
With the ON setting, the values in digits 1 and 2 define a range of
character numbers that are to be read.
0 to 64 characters
First decodable number of characters or lower range limit.
0 to 64 characters
Second decodable number of characters or upper range limit.
0 to 64 characters
Third decodable number of characters.
0 to 64 characters
Fourth decodable number of characters.
0 to 64 characters
Fifth decodable number of characters.
Value from 2 to 100
Number or scans required to reliably detect a label.
Standard
No check
Depending on the symbology (code type) selected for the decoder,
further calculation algorithms can be selected here.
Check digit method used for the decoding of the bar code that has
been read.
If Standard is set, the check digit method intended for the respec-
tive code type is used.
Standard
Not standard
Specifies whether the check digit is transmitted. Standard means
that the transmission matches the standard intended for the
respective code type.
As decoder 1
OFF/ON
0 to 64 characters
0 to 64 characters
0 to 64 characters
0 to 64 characters
0 to 64 characters
Value from 2 to 100
As decoder 1
As decoder 1
BCL 608i
Menu description
Standard
1
Code 2/5i
OFF
10
0
0
0
0
4
Standard
Standard
Code 39
ON
4
30
0
0
0
4
Standard
Standard
38