Creating The Printer Device Description - MPI linkcom 5 User Manual

LinkCom 5 User Manual
8.7.2

Creating the Printer Device Description

On the iSeries command line, enter a command in the form:
CRTDEVPRT DEVD(<DeviceName>) DEVCLS(*LAN) TYPE(*IPDS) MODEL(0)
LANATTACH(*IP) AFP(*YES) PORT(5001) FONT(11) FORMFEED(*AUTOCUT)
RMTLOCNAME('192.194.134.90') USRDFNOBJ(AFP/NETWRKPRT *PSFCFG)
TEXT('<Option Txt Description> ')
Where:
<DeviceName> is the selected name for the printer Device Description which will
also be used as the name for the Output Queue.
AFP is the name of the library in which the PSF configuration was created in the
previous step.
is the name given to the PSF configuration in the previous step.
NETWRKPRT
5001 is by default the port number for the first printer session. Any subsequent
printer sessions will use port no 5002, 5003, 50xx etc.
RMTLOCNAME is the IP address of the LinkCom 5 print server. All printer sessions
printing via the LinkCom 5 print server must point to this IP address.
<Option Txt description> is an optional text description for the Printer Device
Description object.
A completed Device Description looks like this:
60
Page