7.10.7 Password Section; 7.10.8 Logout Of Web Server; 7.10.9 Restart Printserver; 7.10.10 Restore Factory Default Configuration - MPI linkcom 5 User Manual

7.10.7 Password section

The Password section enables setting or changing the LinkCom 5 PrintServer
password. To apply changes, type in current password, enter and re-enter the new
password. If no password (= "adm" ) has been assigned the current password will
be adm.
Pressing the link for "Login TimeOut" will set the timeout for a password login.
Within the timeout, a logged-in user opening a new web browser will not be
prompted for password.
When timeout has passed and no activity has been registered, an automatic logout
from the PrintServer takes place.

7.10.8 Logout of web server

Pressing the "Logout of PrintServer" causes the adm user to be logged out of the
PrintServer web server.

7.10.9 Restart PrintServer

Pressing the "Restart PrintServer" causes the PrintServer to restart. A restart is
needed after having performed configuration changes, and having saved changes.

7.10.10 Restore Factory Default Configuration.

Pressing the Restore Factory option causes all of the LinkCom 5 configuration
(except for eventual password) to be cleared and reset to factory defaults.
Remember after resetting, to perform a PrintServer restart, e.g. by selecting
"Advanced Configuration" followed by "Restart PrintServer"
LinkCom 5 User Manual
Page
54