Strings - MPI linkcom 5 User Manual

LinkCom 5 User Manual
Trays/Bins describe and configure the input trays and output bins of the target
printer. Please refer to the printer's technical manual for configuration of
PCL/PostScript ID's.
Finishing
Finishing define the stapling option and is configurable if the Printer Template
contain a field for Finishing. Enable stapling for the actual option and consult the
printer's technical manual for the PJL command to use.
7.7.4

Strings

Strings are used to send data to the printer before the job (Pre String Settings),
after the job (Post String Settings) or can be used to replace data send to the
printer (Replace String Settings). Strings can either be typed in directly, or
imported via a file.
43
Page