Configuring Scs Transform; Telnet Print - MPI linkcom 5 User Manual

LinkCom 5 User Manual
The output printer can also be a USB printer, in which case the PrintServer has to
be directly connected with the USB printer using a USB cable.
7.7

Configuring SCS transform

SCS transform supports LU1 non-graphic text only print from IBM 3270 mainframe.
The benefit of setting up SCS print with PrintGuide, is that when the IBM 3270 host
system IP address and intended SCS printer queue name have been entered the
LinkCom 5 PrintServer will automatically create and configure the SCS printer at
the IBM host. This gives less host system setup compared to e.g. an IPDS printer
setup.
7.7.1

Telnet Print

39
Page