Physical Printer; Strings; Output Driver - MPI linkcom 5 User Manual

LinkCom 5 User Manual
7.8.2

Physical Printer

Description: Name of the Printer.
7.8.3

Strings

Strings may be used to send data to the printer before the job (Pre String
Settings), after the job (Post String Settings) or can be used to replace data send
to the printer (Replace String Settings).
7.8.4

Output Driver

Output data from LinkCom 5 can be handled in various ways. Using the default
setup, the data is send to a network printer. "TCP/IP Network port driver". The IP
47
Page