Strings; Output Driver - MPI linkcom 5 User Manual

7.5.4

Strings

Strings may be used to send data to the printer before the job (Pre String
Settings), after the job (Post String Settings) or can be used to replace data send
to the printer (Replace String Settings). Strings can either be typed in directly, or
imported via a file.
7.5.5

Output driver

Output data from LinkCom 5 can be handled in various ways. Using the default
setup, the data is send to a network printer. "TCP/IP Network port driver". The IP
Address input field is a text field, so the printer can be addressed using an IPv4
address, an IPv6 address or a DNS host name.
Example:
172.16.6.148
fe80::d2ff:50ff:fe8c:5ef8/64
printer2.company.org
LinkCom 5 User Manual
Page
32