Table of Contents
Advertisement
Built-in Viewer Operation
The camera comes with a Built-in Viewer.
Enter the IP address of the camera in the address
bar of Internet Explorer to start up the Built-in
Viewer. The Built-in Viewer enables operations
such as saving of still images in the JPEG format
and PTZ operations.
Memo :
The first time you display the Built-in Viewer in
0
Internet Explorer, the Built-in Viewer will be
installed on the computer.
The settings required for running the Built-in
0
Viewer on the PC are stored in cookies.
Settings that are stored in cookies are
0
information related to the operation of the Built-
in Viewer, such as the number of the encoder to
be displayed and whether the display size is set
to a fixed or variable size. Settings related to
camera operation are not stored in cookies.
Note :
If you delete the cookies, the current viewer
0
settings are deleted. The next time when you
start the Built-in Viewer, the viewer will operate
in the initialized state.
List of operations
[Built-in Viewer Screen Configuration] P 53
0
[[Image Settings] Settings] P 55
0
[ [PTZ Settings] ] P 57
0
[ [PTZ Control] ] P 59
0
[[Unicast] Settings] P 61
0
[[On Screen Display] Settings] P 62
0
[[Other] Settings] P 63
0
[Exiting Built-in Viewer] P 63
0
If the display or configuration of the open
window appears strange, check the
computer settings as follows:
A Select [Start]-[Control Panel]-[Appearance
and Personalization].
B Open [Adjust screen resolution] under
[Display].
C Check that [Resolution] is set to [Monitor size
(recommended)] in use.
D Otherwise, change the [Monitor size
(recommended)] setting and press the [OK]
button.
E In [Display Settings], press the [Keep
changes] button.
Built-in Viewer Screen
Configuration
Memo :
Built-in Viewer settings are stored in cookies.
0
From this Settings screen, you can set up the
0
Built-in Viewer as the software on the computer.
You cannot set up camera operations from this
screen.
Some menus may not be displayed depending
0
on the firmware version.
For the latest firmware version, please visit our
website.
(The latest firmware version can be found on the
Download page of V.NETWORKS.)
http://www3.jvckenwood.com/english/
products-e.html
Note :
If you delete the cookies, the current viewer
0
settings are deleted. The next time when you
start the Built-in Viewer, the viewer will operate
in the initialized state.
.
* Setting values with R are default values.
MENU OFF/MENU ON
Displays or hides the operation menu.
Click [MENU ON], and the operation menu will
appear on the left of the page.
Control
Switches the Operation Menu to the Control Menu.
Click this button to adjust the [Image Settings],
[PTZ Settings] or [PTZ Control] settings.
(A P55 [[Image Settings] Settings] )
(A P57 [ [PTZ Settings] ] )
(A P59 [ [PTZ Control] ] )
Built-in Viewer Operation
53
Advertisement
Table of Contents
