After Every Operation - Siemens HB36D.70B Instruction Manual

Changing the temperature
Changing the cooking time
Pausing
Cancelling
Checking the clock,
cooking time and end time
Notes
After every
operation
Emptying the water tank
Drying the cooking
compartment
28
This is possible at any time. Use the function selector
to change the temperature.
Change the cooking time using the rotary selector.
Press the Stop button once or carefully open the
cooking compartment door. Start again after closing.
The programme will then continue. Forgotten to start?
After 3 seconds, a signal sounds and "Press Start
button" appears.
Press the Stop button twice.
Press the j button until the required value appears in
the display.
You can also enter a cooking time first. Set the
cooking time with the rotary selector and then set the
type of heating and the temperature. Start the steam
oven.
The cooling fan may continue running when you open
the cooking compartment door. This is normal.
Empty the water tank. Thoroughly dry the seal in the
lid and the tank shaft in the appliance.
Leave the cooking compartment door ajar until the
appliance has cooled down. Wipe the cooking
compartment and the evaporator dish with the
sponge and dry well with a soft cloth.
d
The water in the evaporator dish may still be hot.