Cooling Fan - Siemens HB36D.70B Instruction Manual

Empty the water tank after
each use
"Fill water tank"
display
"Fill water tank?"
display

Cooling fan

After cooking
16
Pull the water tank out of the appliance slowly. Pulling
it out quickly may cause water to spill. Hold the water
tank horizontally, so that no remaining water can drip
out of the valve seat.
Empty out the water.
Thoroughly dry the water tank in the appliance and
the seal in the lid.
If the water tank is empty, a signal sounds.
"Fill water tank" appears in the text display. Operation
is interrupted.
1.
Open the cooking compartment door carefully.
Steam will escape.
2.
Take out the water tank, fill to the mark and
reinsert.
3.
Press the Start button.
This message appears if you start cooking and the
water tank is only half full.
If you think that the water in the tank is sufficient for
the cooking procedure, restart the appliance. If not, fill
the water tank to "max.", slide it back in and start the
appliance.
The appliance is equipped with a cooling fan. It
switches on and off automatically when necessary.
Hot air and steam escape via the door.
The cooling fan will continue to run after cooking has
finished. This is indicated by "Oven cooling".
When the cooking compartment door is opened, the
cooling fan repeatedly turns on and off. The resulting
operating noises are normal.