Table of Contents
Advertisement
Automatic
calibration
After moving house
Before using for the first time
The boiling temperature of water depends on the air
pressure. During calibration, the appliance is set to
the pressure ratios at the place of installation. This
occurs automatically when steaming for the first time
at 100 ºC.
This causes more steam to develop than usual - this
is normal.
So that the appliance automatically adjusts itself to the
new local altitude again, you must reset the appliance
to the factory settings. See the Basic settings section
for more details.
This section tells you everything you need to do before
using the appliance for the first time.
Set the clock
Change the language of the text display if necessary
Change the water hardness if necessary
Heat up the steam oven
Clean the accessories.
Read the safety instructions in the "Important
information" section. It is very important.
First, check whether the j symbol and three zeros
are flashing in the display. "Uhrzeit einstellen" (Set
time) appears in the display.
17
Hide quick links:
Advertisement
Table of Contents
