Xerox WorkCentre 6655 System Administrator Manual page 76

Security
• If you enabled Personalization, configure LDAP server settings. For details, see
on page 56.
• Configure authorization settings. For details, see
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
1. In CentreWare Internet Services, click Properties>Login/Permissions/Accounting.
Click Login Methods.
2.
Configuring Xerox Secure Access
1. On the Login Methods page, next to Xerox
2. Configure the remote server. For details, see the instructions provided with your server hardware.
Once the server is configured, it communicates with the printer and automatically completes the
configuration process.
3. To configure communication manually, personalize instructional windows, and review accounting
options, click Manually Configure.
4. To return to the Login Methods page, click Pending Remote Server Setup.
To configure any settings that are marked in red text as Required; Not Configured, in the table at
5.
the bottom of the page, click Edit.
Manually Configuring Xerox Secure Access Settings
If you are using Xerox ®
communication, personalize instructional windows, or review accounting options.
Before you begin:
Configure the Xerox ® Secure Access authentication server.
1. On the Login Methods page, next to Xerox
Click Manually Configure.
2.
3. Under Server Communication, select the address type and port number.
4. Type the appropriately formatted address and port number.
5. In the Path field, type the following HTTP path: public/dce/xeroxvalidation/convauth.
6. Under Embedded, select Enabled.
7. Under Device Log-In Methods, select an option:
− Xerox Secure Access Device Only allows users to access the printer only using the card reader.
Xerox Secure Access Device + alternate onscreen authentication method allows users to
−
access the printer by logging in at the control panel.
8. When Network Accounting is configured, the printer can obtain user accounting information from
the authentication server. To reduce the number of screens that appear when a user logs in at the
control panel, select Automatically apply Accounting Codes from the server.
If you want users to provide an accounting code at the control panel, select User must manually
enter accounting codes at the device.
76 Xerox WorkCentre
®
System Administrator Guide
Secure Access for authentication, you can manually configure remote server
6655 Color Multifunction Printer
®
Authorization on page 81.
® Secure Access Setup, click Edit.
Secure Access Setup, click Edit.
®
LDAP server settings