Entry Screen Defaults - Xerox WorkCentre 6655 System Administrator Manual

Entry Screen Defaults

Use this page to set the default screens that appear on the touch screen when you press buttons on the
printer control panel.
In CentreWare Internet Services, click Properties>General Setup.
1.
2. Click Entry Screen Defaults.
Under Services, select the default screen that appears when you press the Services button on the
3.
control panel.
Under Job Status, select the default screen that appears when you press the Job Status button on
4.
the control panel.
5. Under Default Walk-Up Screen, select the screen that appears when you walk up to the printer.
6. Under Default Screen when Originals are Detected, select the screen that appears when you load
original documents.
Click Apply.
7.
Xerox WorkCentre 6655 Color Multifunction Printer
® ®
Administrator Tools
System Administrator Guide
235