Connecting The Printer - Xerox WorkCentre 6655 System Administrator Manual
Color multifunction printer
Hide thumbs
Also See for WorkCentre 6655:
- Operation manual (15 pages) ,
- Quick start manual (14 pages) ,
- Software installation manual (4 pages)
Table of Contents
Advertisement
Initial Setup
Connecting the Printer
1.
Connect the power cord to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5 or better Ethernet cable to the Ethernet port on the back of the
printer. Connect the other end of the cable to a correctly configured network port.
3.
If your printer has fax installed, connect it to a correctly configured telephone line.
4.
Turn on the printer.
Note:
The fax function works best with an analog phone line. Voice-Over Internet Protocols (VOIPs)
such as FIOS and DSL are not supported.
18
Xerox
WorkCentre
®
System Administrator Guide
6655 Color Multifunction Printer
®
Advertisement
Table of Contents
