Christie DHD700-GS User Manual page 39

Menu item Description
Hot Key Settings Assigns a different function to
the hot key on the IR remote
keypad by highlighting the
function in the list and
pressing ENTER.
Choose a function that does
not already have a dedicated
button, and assign the hot
key to that function, allowing
you to quickly and easily use
the chosen function.
Service Displays projector
information, sets test
patterns, error logs, and high
temperature warnings.
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
Options
—
• Projector Info—Displays the current projector settings.
(Read-only)
• Factory Reset—Restores all settings to their default value. It
does not reset network but it resets RS232.
• Test Pattern—Sets the required internal test pattern to
display. To turn off a test pattern, select Off.
• Wheel Index (2X)—Sets the wheel index to Speed 2X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Wheel Index (3X)—Sets the wheel index to Speed 3X. Only
use this setting when a new main board is installed, and the
picture quality needs to be optimized.
• Error Log—Shows the projector error log for debug.
• Mode Adjustment—Fine tunes the horizontal (H) and vertical
(V) start position for a signal in the EDID timing table and
record the values in the system to override the timing table.
To keep the settings, before exiting the menu, select Saved
to Record. To revert to original timing table settings,
manually clear each setting. Factory Defaults do not clear
these override settings.
• Laser Diode Info—Displays the information of each laser
diode bank including its voltage, current, and temperature.
Operation
39