Operation
The projector has multilingual on-screen display (OSD) menus so you can make image adjustments
and change a variety of settings.
Most of the projector controls are accessed from within the projector menu system. Several groups of
related functions are selectable from the Main Menu as shown below.
•
To display the Main Menu, on the IR remote keypad or on the built-in keypad on the rear of the
projector, press MENU.
•
To navigate within the menu and adjust a setting up or down, use the arrow keys.
•
To select a highlighted menu item or use it to change or accept a value, press ENTER.
You can then select the next item that you want to adjust in the menu.
•
To return to the previous menu or exit menus if at top level, press EXIT.
1. Size & Position
2. Image Settings
3. Configuration
4. Light Source
5. Status
6. Input Switching & PIP
7. Language
8. Test Pattern
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
Main Menu
English
Off
28