Turning The Projector On; Turning The Projector Off - Christie DHD700-GS User Manual

Turning the projector on

The projector cables must be securely connected before turning the power on.
Warning! Failure to comply with the following could result in death or serious injury.
• Do not look into the projector lens when the laser is on. The bright light may result in permanent
eye damage
1. The Power button on the keypad is illuminated when the power cables are connected.
2. Ensure the lens has been installed in the projector.
3. Ensure that no one or no objects are in the beam path before turning on the projector.
4. To turn on the projector, on the IR remote keypad press
The status LED is green with a slow blink.
5. To select an input source and turn it on, on the IR remote keypad select Input Key.
Available input sources are VGA, HDMI1, HDMI2, DVI, 3G-SDI, and HD-BaseT.
The projector detects the source you selected and displays the image.
2
1 Power on
The first time the projector is used, select the preferred language from the Main Menu after the
startup screen is displayed.

Turning the projector off

Power off the projector in preparation for inspection or maintenance.
1. To turn the projector off, on the IR remote keypad or built-in keypad press
A warning message appears on the displayed image.
2. To confirm your selection, press
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
2
1
Power on
2
1
SHUTTER
VGA BNC HDMI1
HDMI2 DVI-D DP
3G-SDI HDBaseT CVBS
PRESENT.
3 Input Key
again.
or on the built-in keypad press
.
Installation
.
3
20