Christie Presenter; Connecting To The Projector - Christie DHD700-GS User Manual

Christie Presenter

The Christie Presenter application allows a remote desktop from a host PC to be displayed on the
network display through Ethernet or wireless transports. It can adapt to different network settings
(DHCP, fixed IP, and direct link by Ethernet cable).
Download Christie Presenter from the Christie website or from the web page of the projector.

Connecting to the Projector

Before using Christie Presenter, you must connect to the projector.
1. Connect to the projector using WiFi or Ethernet.
Ethernet connection:
a. To determine the projector's IP address, select Main Menu > Configuration >
Communications > LAN.
1. DHCP
2. IP Address
3. Subnet Mask
4. Default Gateway
5. MAC Address
b. Configure your PC IP address to be on the same network as the projector.
c. The projector and computer must be connected directly or over the network using
Ethernet.
WiFi Wireless connection:
a. Insert the WiFi USB dongle (1DWUSB-BGN) into the USB port on the projector input
panel.
For more information about the WiFi USB dongle, see
b. Power on the projector.
c. Obtain the WiFi SSID from Main Menu > Configuration > Communications > WLAN.
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
LAN
Optional accessories on page 77.
Operation
55