Christie DHD700-GS User Manual page 38

Menu item Description
Communications Determines the
communication settings such
as network setup, serial port
information, and so on.
Backlight Controls the back light
Preferences behavior and timeout setting
for the keypad and status
LED.
Color Matching Enables the selected method
(Manual Adjustment or HSG)
to define the precise hue of
each primary color
component (red, green, blue
and white).
When one method is enabled,
the other method is
automatically disabled. For
both methods, if Auto Test
Pattern is enabled, the solid
colored test pattern can be
displayed according to the
menu item on which you are
positioned.
For more information on color
matching, see
matching
GS Series User Manual
020-001044-02 Rev. 1 (07-2016)
Options
Network—Allow you to setup network settings.
• DHCP—Turns the DHCP on or off.
• IP Address—Assigns the network IP address.
• Subnet Mask—Assigns the network subnet mask.
• Default Gateway—Assigns the network default gateway.
• MAC Address—Displays the network MAC address value.
• Enable—Enables or disables the WLAN functionality.
• Start IP—Enter the start IP address for wireless network.
• End IP—Enter the end IP address for wireless network.
• SSID—Enter a unique wireless network name (SSID).
• Password—Enter the wireless network password.
• Show Network Messages—Turns network messages on or off
• Restart Network—Restarts the network.
• Network Factory Reset—Performs factory reset on the
network settings. The Projector Name, IP Address (LAN),
Start IP and End IP, and SNMP settings can be reset.
Serial Port Baud Rate—Selects the serial port and baud rate.
Serial Port Echo—Controls whether the serial port echoes
characters.
Serial Port Path—Sets the serial port path to RS232 or
HDBaseT.
Projector Address—Sets the projector address (0 to 9). The
projector responds to the IR remote set to the same address as
the projector or to the IR remote set to address 0.
—
• Manual Adjustment—Manually defines the precise hue of
each primary color component.
• HSG Adjustment—Adjusts the hue, saturation, and gain
(HSG) of the projected image. The HSG function
independently controls each of the color regions R, G, B, C,
M, Y, and W.
• Wall Color—Sets the wall color so the projector can enhance
the color performance customized for the specific wall.
Color
on page 40.
Operation
38