Region Exiting Detection - HIKVISION DS-2DF5220S-DE4/Ww User Manual

User Manual of Network Speed Dome
8. Select the linkage methods for region entrance detection, including Notify
Surveillance Center, Send Email, Upload to FTP, Trigger Channel, Trigger Alarm
Output, and Smart Tracking. Please refer to Step 3 in Section 6.6.1 Configuring
Motion Detection.
9. Click

6.6.13 Region Exiting Detection

Purpose:
Region exiting detection function detects people, vehicle or other objects which exit
from a pre-defined virtual region, and some certain actions can be taken when the
alarm is triggered.
Steps:
1. Enter the Region Exiting Detection settings interface:
Configuration> Advanced Configuration> Smart Event> Region Exiting
Detection
2. Check the checkbox of Enable Region Exiting Detection to enable the function.
Figure 6-60 Configuring Region Exiting Detection
3. Select the region from the dropdown list for detection settings.
4. Click the
5. Click on the live video to specify the four vertexes of the detection region, and
right click to complete drawing.
Repeat the step to configure other regions. Up to 4 regions can be set. You can
click the
© Hikvision
button to save the settings.
button to start the region drawing.
button to clear all pre-defined regions.
98