HIKVISION DS-2DF5220S-DE4/Ww User Manual page 94

User Manual of Network Speed Dome
3. The event triggered and park action related PTZ movement will be locked for 180
seconds after you enter the intrusion detection interface. Optionally, you can
click the
movement when the button turns to
4. Draw area.
(1) Select the Region No.in dropdown list.
(2) Click
(3) Click on the image to specify a corner of the rectangle, and right-click the
mouse after four corners are configured.
Up to four areas are supported.
You can click
5. Configure the parameters for each defense region separately.
 Threshold: Range [0-10s], the threshold for the time of the object staying in
the region. If you set the value as 0, alarm is triggered immediately after the
object entering the region.
 Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the
object which can trigger the alarm, when the sensitivity is high, a very small
object can trigger the alarm.
 Detection Target: You can select human, vehicle, or all (human &vehicle) as
the detection target from the dropdown list. If Human is selected, only
© Hikvision
Figure 6-56 Configuring Intrusion Area
button to manually activate the movement, or lock the
to draw a rectangle on the image as a defense region.
to clear the areas you drawn.
by clicking it.
93