HIKVISION DS-2DF5220S-DE4/Ww User Manual page 107

User Manual of Network Speed Dome
4. Set the time interval between two snapshots.
5. Click
 Uploading to FTP
Please make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.

Upload continuous snapshots to FTP
Steps:
1) Check the Enable Timing Snapshot checkbox.
2) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
 Upload event-triggered snapshots to FTP
Steps:
1) Check the Enable Event-triggered Snapshot checkbox.
2) Configure the FTP settings and check
Settings interface. Please refer to Section 6.3.8 Configuring FTP Settings for more
details to configure FTP parameters.
3) Check
interface. Please refer to Step 3 in Section 6.6.1 Configuring Motion Detection.
© Hikvision
to save the settings.
checkbox in Motion Detection Settings or Alarm Input
106
checkbox in FTP
checkbox in FTP