Table of Contents
Advertisement
User Manual of Network Speed Dome
Notify surveillance center, send email, trigger alarm output, etc. are selectable.
Please refer to Step 3 in Section 6.6.1 Configuring Motion Detection.
7. Click
6.6.8 Configuring Dual-VCA
Purpose:
Enable the VCA function and then the information of the objects (e.g. human, vehicle,
etc.) will be marked in the video stream and you can set rules on the connected
back-end device to detect the events including line crossing, intrusion, etc..
Steps:
1. Enter the Dual-VCA function configuration interface.
Configuration> Advanced Configuration> Video/Audio> Display Info. on Stream
2. Check the Enable Dual-VCA checkbox.
3. Click
to save the settings.
6.6.9 Configuring Intrusion Detection
Intrusion detection can set an area in the surveillance scene and once the area is
entered, a set of alarm action is triggered.
Steps:
1. Enter the intrusion detection interface:
Configuration > Advanced Configuration > Events > Intrusion Detection
2. Check the Enable Intrusion Detection checkbox.
© Hikvision
to save the settings.
92
Advertisement
Table of Contents
