Configuring Line Crossing Detection - HIKVISION DS-2DF5220S-DE4/Ww User Manual

Table of Contents

Advertisement

User Manual of Network Speed Dome
human beings will be identified as detection objects and as well as Vehicle.
6. Click
schedule configuration is the same as the setting of the arming schedule for
motion detection. Refer to Step 2 in Section 6.6.1 Configuring Motion Detection.
7. Check the checkbox to select the linkage method, including Notify surveillance
center, send email, trigger channel, smart tracking and trigger alarm output are
selectable. Please refer to Step 3 in Section 6.6.1 Configuring Motion Detection.
8. Click

6.6.10 Configuring Line Crossing Detection

The virtual plane detection can be adopted for the intrusion detection. Once the
virtual plane is detected being traversed according to the configured direction, a set
of alarm action is triggered.
Steps:
1. Enter the Line Crossing Detection interface:
Configuration > Advanced Configuration > Events > Line Crossing Detection
2. Check the Line Crossing Detection checkbox.
3. Select the Line in dropdown list to configure.
4. The event triggered and park action related PTZ movement will be locked for 180
seconds after you enter the line crossing detection interface. Optionally, you can
click the
movement when the button turns to
© Hikvision
to edit the arming schedule for intrusion detection. The arming
to save the settings.
button to manually activate the movement, or lock the
by clicking it.
94

Advertisement

Table of Contents
loading

Table of Contents