Table of Contents
Advertisement
User Manual of Network Speed Dome
If you select Motion Detection, the video will be recorded when the motion
is detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Step 1 in the Section 6.6.1 Configuring Motion Detection.
Record Triggered by Alarm
If you select Alarm, the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of Alarm
Input Settings interface. For detailed information, please refer to Section
6.6.4 Configuring External Alarm Input.
Record Triggered by Motion & Alarm
If you select Motion & Alarm, the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 6.6.1 and Section 6.6.4 for detailed information.
Record Triggered by Motion | Alarm
If you select Motion | Alarm, the video will be recorded when the external
alarm is triggered or the motion is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Motion Detection and Alarm Input Settings interfaces.
Please refer to Section 6.6.1 and Section 6.6.4 for detailed information.
Record Triggered by Audio Exception Detection
If you select Audio Exception Detection, the video will be recorded when
the audio exception is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Audio Exception Detection interface. Please refer to Section
6.6.7 for detailed information.
Record Triggered by Other Smart Events
The smart events include Line Crossing Detection, Intrusion Detection,
Region Entrance Detection and Region Exiting Detection. If you select to
record by one type of the smart events, the video will be recorded when the
selected smart event is triggered. Besides configuring the recording schedule,
you have to configure the settings on the specific event settings interface.
Record Triggered by All Events
If you select All Events, the video will be recorded when any event is
detected.
(3) Check the checkbox
day to the whole week. You can also check any of the checkboxes before the
date and click
(4) Click
© Hikvision
and click
.
to save the settings and exit the Edit Record Schedule
104
to copy settings of this
Advertisement
Table of Contents
