Table of Contents
Advertisement
User Manual of Network Speed Dome
area.
You can drag the corners of the red rectangle area to draw a polygon mask.
4. Click
set without saving them.
5. Click
to save the privacy mask, and it will be listed in the Privacy Mask
List area; set the value of Active Zoom Ratio on your demand, and then the
mask will only appear when the zoom ratio is greater than the predefined value.
6. you can also define the color of the masks.
7. You can select a mask and click
8. Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 24 areas on the same image.
5.7 Configuring Smart Tracking
Purpose:
The speed dome tracks the moving objects automatically after you configure this
function.
Steps:
1. Enter the Smart Tracking Settings interface:
Configuration > Advanced Configuration> PTZ > Smart Tracking
© Hikvision
to finish drawing or click
Figure 5-10 Privacy Mask List
Figure 5-11 Define Mask Color
to clear all of the areas you
to delete it from the list.
45
Advertisement
Table of Contents
