Description; Calling; D Selecting A Tx Code - Icom IC-410PRO Advanced Manual

7
SELCALL (Selective Calling)

Description

Besides the Tone Squelch function for silent standby,
you can use the Selcall (Selective Calling) function.
Selcall has 100,000 options when using 5 tone.
You can use the Selcall function to call another unit or
call a Group on the same channel, as well as station
code, text, the answer back function and auto scan
start. These, and many more, can be set using the
optional CS-410PRO
cloning software
NOTE:
• Selcall cannot be used on CB channel 5, 35, and
Repeater channel 5.
• A Selcall transmission is restricted to a total of 3
seconds in a 1 minute period.

Calling

TX code is the Selcall code that you transmit. You can
enter maximum of 32 TX codes into the IC-410PRO,
using the optional CS-410PRO

D Selecting a TX code

1) Select the desired CB channel or Repeater
channel, except for CB channel 5, 35, and
.
Repeater channel 5.
➥ Push [UP]/[DOWN].
2) Turn ON the Function mode.
➥ Push [FUNC].
3) Enter the TX code selection mode.
➥ Push [SCAN].
4) Select the desired TX code or text.
➥ Push [UP]/[DOWN].
5) Push [PTT] to transmit the selected TX code, or
push [SCAN] to set the selected TX code and exit
the TX code selection mode.
• When you transmit, a short beep sounds.
Information
You can assign TX code texts to all 32 TX codes using
the CS-410PRO
7-2
• " " is displayed.
TX code
• If entered using the CS-410PRO
the text is displayed instead of the code.
cloning software
.
cloning software
,
cloning software
.