Text Overlay Setup Of Input Cards; Setup Of The Correspondence Between Output Channels And Input Channels For Output Cards; Overlap Mode Setup; Time Setup For Overlap Mode Switching - Vdwall LVP8601 User Manual

3. Text overlay setup of input cards

Press "Text" and select "SDI, DVI, VGA or Video" as the signal for Text
overlay. Press "In-A, In-B, In-C or In-D" to select an input card for
operation.
4. Setup of the correspondence between output channels and input
channels for output cards
When the indicator for "Matrix" is on and that for "Overlap" is off, press
"CH1, CH2, CH3 or CH4" to select the output channel and press"In1,
In2, In3 or In4" to select the input channel. Press "Out-K" or "Out-L" to
select an output card for operation.

5. Overlap mode setup

When the indicator for "Overlap" is on and that for "Matrix" is off, press
"CH1, CH2, CH3 or CH4" to select one as the top layer, this will change
the overlapping relationships. The setup is only available in
configuration mode 3, 6 and 7. Press "Out-K" or "Out-L" to select an
output card for operation.

6. Time setup for overlap mode switching

Press "Fade" to set the time needed for fade effect when switching the
overlapping sequences among the image layers. The time can be set
as 1s, 2s, 3s, 4s or 5s. 0s means the switching is seamless. The setup is
only available in configuration mode 2, 3, 6 and 7. Press "Out-K" or
"Out-L" to select an output card for operation.

7. Display mode setup of output cards

There are 16 display modes in total. Press "M1, M2 or M3" to directly
select display mode 1, 2 or 3 and the indicator light is on. Mode 4—16
can be selected by pressing "M+" to enter mode invoking menu and
rotating the knob. The selected mode is highlighted and the indicator for
"M+" is on, press "OK" to confirm and "
"Display Mode Setup" is as follows:
Each display mode has 4 types of status and its related parameters:
A: Size and location of image layer (input image will be cropped, so the
new size and location will be created and output).
B: Overlapping sequence of image layers
C: Time needed for fade effect of changing the overlapping sequence
D: Matrix configuration of channels for image layers
" to quit. The menu of
20 / 42