Chapter 5: Function Introduction - Vdwall LVP8601 User Manual

11) Matrix: turn on the matrix switching mode of output cards and the
indicator red light is on. Press "CH1, CH2, CH3 or CH4" to select an
image layer and "In1, In2, In3 or In4" to select the input channel for the
current image layer.
12) Knob: turn it to adjust the parameters on the menu.
13) OK: press it to confirm the operation.
14) ↑Brt+, ↓Brt-: versatile buttons, "↑" and "↓" are used to select an item in
the menu, while Brt+ and Brt- are used to adjust the brightness.
15) : return to the previous menu.
16) Setup: enter the setup menu.
17) M1, M2, M3, M+: display mode select.
There are 16 display modes in total. Press M1, M2 or M3 to directly
select display mode 1, 2 or 3 and the indicator light is on. Mode 4—16
can be selected by pressing M+ to enter mode invoking menu and
rotating the knob.
Each display mode has 4 types of status and its related parameters:
A: Size and location of image layer (input image will be cropped, so the
new size and location will be created and output).
B: Overlapping sequence of image layers
C: Time needed for fade effect of changing the overlapping sequence
D: Matrix configuration of channels for image layers
18) Lock: press the button and when the indicator light is on, all the other
buttons are locked. Press the button again for 3 times, all the other
buttons are unlocked and the light is off.
19) Info: display the system information. We can continue pressing this
button to check different status and parameters of the device.

Chapter 5: Function introduction

LVP8601 can maximally support 4 pcs (In-A ,In-B, In-C, In-D) of video
input cards (each card includes 1 X SDI, 1 X DVI, 1 X VGA and 1 X
Video) or 2 pcs of single DVI straight-through cards and 2 pcs of
output cards.
10 / 42