Table of Contents
Advertisement
Setup" and "OK" to enter the sub menu.
Press "↑,↓" to select the setting, turn the knob to adjust and then press
"OK" to confirm.
The adjusting range of brightness, contrast and color is 0-100.
Brightness adjusting is only valid for the selected input card, if the
adjusting is wrong, press "Reset" to return to the default.
Notice: to change the settings is not recommended unless brightness
adjusting
through
requirements.
4) Advanced setup
On the menu of "Input Card Setup", press "↑, ↓" to select "Advanced
Setup" and "OK" to enter the sub menu.
In-A Setup
--------------------------------------
1.Main Setup
2.PIP Setup
3.Image Setup
4.Advanced Setup
--------------------------------------
Input Card Image Setup
In-A
--------------------------------------
1.Brightness
2.Contrast
3.Color
4.Reset
--------------------------------------
the
panel
26 / 42
50
50
50 –> 56
buttons
can't
meet
customers'
Advertisement
Table of Contents
