Table of Contents
Advertisement
5) Edge blending setup (only in configuration mode 4)
On the menu of "Output Card Setup", press "↑, ↓" to select "Edge
Blending Setup" and then press "OK" to enter the sub menu.
Press "↑,↓" to select the setting, turn the knob to adjust and then press
"OK" to confirm.
6) Advanced setup
On the menu of "Output Card Setup", press "↑, ↓" to select "Advanced
Setup" and "OK" to enter the sub menu. Press "Out-K" or "Out-L" to
select the output card and press "CH1, CH2, CH3 or CH4" to select the
channel to set up.
Set the configuration mode of output card
Out-K Setup
--------------------------------------
1.Input Image Setup
2.Output Image Setup
3.Clock Setup
4.Edge Blending Setup
5.Advanced Setup
--------------------------------------
Output Card Edge Blending Setup
Out-K/CH1
--------------------------------------
1.Direct Vert
2.Position
3.Start
--------------------------------------
Out-K Setup
--------------------------------------
1.Input Image Setup
2.Output Image Setup
3.Border Setup
4.Advanced Setup
--------------------------------------
32 / 42
Vert
Left/Up
0
Advertisement
Table of Contents
