Table of Contents
Advertisement
2. Configuration mode 2
In1
In2
In3
Output
In4
Matrix
Config_Mode2
In this mode:
Out1= CH1
This means:
Out1 outputs image from CH1
Out2 outputs image from CH2
Out3 outputs image from CH3
There is no output from Out4.
In this mode, any output port (Out1, Out2, Out3) can select any input
channel (In1, In2, In3, In4). Therefore, we need to press "Matrix" to start
the matrix switching mode, press CH1, CH2 or CH3 to select output
port (Out1, Out2, Out3) and press In1, In2, In3 or In4 to select input
channel for the current output port.
In this mode, the size and location of output images from Out1, Out2
and Out4 can be set randomly.
In this mode, input images can be cropped as output images for Out1,
Out2 and Out3.
By using this mode, the LVP8601 will be mainly used as a switcher of 4
inputs and 3 outputs with seamless or fade effect.
CH1
CH2
CH3
CH4
Out2 = CH2
Out3 = CH3
14 / 42
Out1
Out 2
Out 3
Out 4
Advertisement
Table of Contents
