Table of Contents
Advertisement
Notice: sometimes when users change output cards by
themselves, the data of new output cards might be inconsistent
with that saved by the system. "Reset data" will restore the data
of new input cards to the factory default. The operation is only
valid for a single output card, so it won't affect the data of other
output cards.
3. System setup
Press "Setup" to enter "User Settings". Press "↑,↓" to select "System
Setup" and "OK" to enter the sub menu.
1) IP address
On the menu of "System Setup", press "↑,↓" to select "IP Setup" and
"OK" to enter the sub menu.
Press "↑,↓" to select the setting, turn the knob to adjust and then press
"OK" to confirm.
Setup
--------------------------------------
1.Input Card Setup
2.Output Card Setup
3.System Setup
--------------------------------------
System Setup
--------------------------------------
1.IP Setup
2.MASK Setup
3.GATE Setup
4.MAC Setup
5.MatrixK Setup
6.MatrixL Setup
7.Advanced Setup
--------------------------------------
36 / 42
Advertisement
Table of Contents
