Table of Contents
Advertisement
Tips
--------------------------------------
Data will reset
Press <OK> to reset
Press <return> to cancel
--------------------------------------
Notice: to change the configuration mode will lead to reset of the data
of output cards, please be careful.
9. Brightness setup
The adjusting range of brightness is 0-32，"0" stands for the lowest
brightness, press "Brt+" to increase the brightness or "Brt-" to lower it.
To make sure of the complete grey level of the output images, the
default is set as "32" and
output cards for brightness adjusting.
Out-L Brightness
--------------------------------------
1.Brightness
--------------------------------------
10. VGA automatic calibration
When the current input signal is VGA and it is valid, press "VGA" to enter
the confirmation menu of VGA automatic calibration, press "VGA" one
more time to confirm calibration and then "
menu is as follows:
we can turn the knob to select one or two
32
22 / 42
"to quit the menu. The
Advertisement
Table of Contents
