Chapter 7: User settings
User settings, which are used to setup the overall system, consist of 3 parts:
input card, output card and the system. On the default menu, when system
starts, press "Setup" to enter the menu of "User Settings" and "↑,↓" to select
settings, press "OK" to confirm and "
the detailed introduction of each setting:
1. Input card setup
Press "Setup" to enter the menu of "User Settings", "↑, ↓" to select
"Input Card Setup" and "OK" to enter the sub menu. Press "In-A, In-B,
In-C or In-D" to select an input card to change its settings.
1) Set the size and location of main picture
On the menu of "Input Card Setup", press "↑,↓" to select "Main Setup"
and "OK" to enter the sub menu.
Press "↑,↓" to select the setting, turn the knob to adjust and then press
"OK" to confirm.
Setup
--------------------------------------
1.Input Card Setup
2.Output Card Setup
3.System Setup
--------------------------------------
In-A Setup
--------------------------------------
1.Main Setup
2.PIP Setup
3.Image Setup
4.Advanced Setup
--------------------------------------
24 / 42
"to quit the menu. The following is