Configuration Mode 1 - Vdwall LVP8601 User Manual

select the mode according to their specific requirements.

1. Configuration mode 1

In1
In2
In3
In4
Config_Mode1
In this mode,
Out1=CH1 Out2= CH2 Out3 = CH3 Out4 = CH4
This means:
Output port 1 (Out1) outputs image from image layer 1 (CH1)
Output port 2 (Out2) outputs image from image layer 2 (CH2)
Output port 3 (Out3) outputs image from image layer 3 (CH3)
Output port 4 (Out4) outputs image from image layer 4 (CH4)
In this mode, any image layer (CH1, CH2, CH3, CH4) can select any
input channel (In1, In2, In3, In4). Therefore, we need to press
"Matrix" to start the matrix switching mode, press CH1, CH2, CH3 or
CH4 to select the image layer and press In1, In2, In3 or In4 to select the
input channel for the current image layer.
Especially when the same input channel is selected for CH1, CH2,
CH3 and CH4 at the same time, each image layer can crop and scale
the image from the input channel, for the purpose of application of
4-output image mosaic.
By using this mode, LVP8601will be mainly used for seamless matrix
(4X4) switching or scaled image mosaic (4 outputs).
Base on Configuration mode 1 (Config_Mode1), we can switch input
matrix so that each image layer (CH1, CH2, CH3, CH4) can select any
CH1
CH2
CH3
Output
CH4
Matrix
12 / 42
Out1
Out 2
Out 3
Out 4