LVP7000 series user manual
7-1 Input card setup
After system starting up, press Setup button to enter user
setup menu, in the menu through press ↑,↓ button to select Input
Card Setup(1.1-4.2) , press knob (OK button) to enter the setup
menu as below. In the menu can configure input card parameters.
1. PIP setup
1.
Input Card Setup(1.1-4.2)
--------------------------------------
1. PIP Setup
2. TEXT Setup
3. Color & Brightness, etc.
4. Advanced
Picture 7-1a LCD interface: input card setup
PIP setup menu is used to set the location
and size of main and PIP image. In the menu,
press input card button (In-A,In-B,In-C,
In-D)to select the input card you need to set,
press ↑ , ↓ button to select the relative setup
menu option, rotate knob (OK button) to
42
In-A
>>
>>
>>
>>