Table of Contents
Advertisement
In-A
In-B
In-C
In-D
Main
Matrix
（ MatrixK
/MatrixL）
Main Board
As shown in the figure, CH1, CH2, CH3 and CH4 stand for 4 internal
image output channels or image layers in the output card. In the control
software interface and on the panel buttons or OSD display, those channels
or layers will be all marked as CH1, CH2, CH3 and CH4;
In1, In2, In3 and In4 stand for 4 input ports for the output card and
they can only be connected to video input cards or DVI straight-through
cards (In-A, In-B, In-C and In-D) through the master matrix (matrix
K/matrix L), which is generated by the master control board.
Out1, Out2, Out3 and Out4 stand for 4 physical DVI output ports of the
output card;
The output card is designed with 6 image display modes and they are
named as configuration modes in this system. There are totally 6
configuration modes including mode 1, 2, 3, 4, 6 and 7. Customers can
In1
In2
In3
Output
In4
Matrix
Output（Out-K）
In1
In2
In3
Output
In4
Matrix
Output（Out-L）
11 / 42
Out1
CH1
Out2
CH2
Out3
CH3
CH4
Out4
Out1
CH1
Out2
CH2
Out3
CH3
CH4
Out4
Advertisement
Table of Contents
