Extron electronics NetPA 502 AT User Manual page 23

2. The Dante Controller - Device View dialog opens.
Select your device from the
NOTES:
• If there are multiple NetPA ATs connected to the network that have not been
renamed, to identify an individual device you must obtain the MAC address of
the desired device from the label on the rear panel.
• The identify device tool can also be used to identify the unit. Refer to
Identifying the Physical Device
3. The Device View dialog populates with the selected NetPA AT information.
4. Click the
Device Config
5. In the Rename Device panel, enter the new name of the device in the text field. No
spaces are allowed in the name.
6. Click . A warning opens.
Apply
NetPA AT Series User Guide • Dante Configuration and Operation
(Select a Dante Device...)
on page 25.
tab to open the device configuration page.
drop-down list.
17