Extron electronics NetPA 502 AT User Manual page 26

To rename an input
1. From the menu on the
Device
Alternatively, press <Ctrl+D> on the keyboard.
2. From the
Select a Dante Device
Figure 10. Device Drop-down Menu on the Device View Screen
3. Select the tab (see figure 11,
Receive
4. Click on the default name of the desired input. The name becomes a text box with a
cursor ( ).
2
1 1
2 2
Figure 11. Device View Screen — Renaming an Input
5.
In the selected name text box, enter the new name (up to 30 characters) using any
combination of letters, numbers, and special characters.
6. Press <Enter> to select the next name down on the
input text box.
7. Repeat steps 4 through 6 for each input to be renamed.
8. When finished renaming inputs, close the
NetPA AT Series User Guide • Dante Configuration and Operation
screen, select
Network View
drop-down menu, select the name of your NetPA AT.
).
1
Receivers
dialog box.
Device View
Device View.
list, or click in another
20