Renaming An Input - Extron electronics NetPA 502 AT User Manual

Renaming an Input

If the devices are not properly named, Dante network connection points can quickly become
unmanageable in large systems. To better organize the various inputs, it is recommended
you name each input using descriptions of the device they belong to, the location of the
device, or the purpose of the input.
To view the inputs of a receiver device on Dante, click the
to expand it (see
1 1
2 2
Figure 9.
The names shown in the
of the connected device.
•
The NetPA AT input is the Dante receiver (
•
The named input
TIP: To simplify setup and operation of large matrix systems, rename the input (receiver)
lines to better indicate the output to which a receiver is connected.
figure 9, , for an example).
1
Expanded Device View — Input and Output Names
Dante Receivers
( )
2
is INPUT-MONO.
NetPA AT Series User Guide • Dante Configuration and Operation
sign next to the receiver name
+
column are extracted from the Dante interface
)
1 labelled NetPA-Classroom-01.
19