Extron electronics NetPA 502 AT User Manual page 32

2. From the toolbar, select
3. The
Dante Controller - Device View
'Select your device from the
4. Click the
Network Config
5. Click on
Manually configure an IP Address
subnet mask.
6. Click .
Apply
7.
Next, the warning box will appear, click
8. Click .
Reboot
NetPA AT Series User Guide • Dante Configuration and Operation
.
Device>Device View
dialog box opens.
(Select a Dante Device...)
tab to open the network configuration page.
, then enter the IP address and the
.
Yes
drop-down list.
26